Ultimate Noise Filter: 12 Volt / 2 AMP Isolated Power Supply

Are you experiencing persistent alternator whine or other noise in your bike's audio system? At your wits-end trying all sorts of filters, but nothing works? This unique item may be just the trick you're looking for! We've solved all sorts of problems, where the cause of alternator noise is entering one or more audio devices through the 12 volt power line. This, in-turn, presents itself as noise in the audio output of the device, and no manner of ground loop isolators or 'in-line filters' will fix this, because these are trying to fix a symptom and not eliminate the root cause of the noise.

The best test to see if a system would benefit from an isolated power supply, is to temporarily power the component with a small 12 Volt DC motorcycle battery - separate from your bike's 12 volt power. If the noise goes away, and the component performance improves with the motorcycle battery, then the isolated supply should be considered.

An isolated power supply is not an in-line filter. The supply actually generates its own energy, and when installed correctly, acts like a small motorcycle battery that never needs to be charged.

This  Isolated Power Supply supplies a regulated 13.8 Volts DC at 2 Amps from an input voltage of 9 to 16 Volts DC. The main feature of the isolated power supply is that output voltage is NOT connected to the input voltage. This means that as long as the load does not touch the bike's chassis, this isolated power supply  will provide a new ground reference that is clean, regulated, and free of the bike's accessory and alternator or voltage regulator noise. Uses for this supply include powering intercom hubs, GPS's, radar detectors, GMRS/FRS/HAM radios, satellite radios - any device that is audio related.

There is a 3-Amp fuse on the + Input Lead. Simple installation, and it works like magic. Not sure if this is the right solution for your situation? Contact us, and we'll help you!