Home /
Brands /
Skene Design /
IQ-160 Intelligent Lighting Controller

IQ-160 Intelligent Lighting Controller

Part #: IQ-160 Controller

Email to a Friend

Be the first to review this product

Availability: In stock

From: $49.99

To: $84.99

Price as configured: $0.00

| Add to Compare

Quick Overview

Control any rear-facing LED or incandescent running, brake and turn signals, up to a maximum of 30 watts per side.

Skene IQ-160 Intelligent Lighting Controller

Double click on above image to view full picture

Qty: *Choose an option:

IQ-160-TS Intelligent Lighting Controller +$66.99
IQ-160 Intelligent Lighting Controller +$49.99
IQ-160+ Intelligent Lighting Controller (with visual voltmeter) +$66.99
IQ-160-TS+ Intelligent Lighting Controller (with turn signals and visual voltmeter) +$84.99

* Required Fields

Price as configured: $0.00

Qty:

Details

The IQ-160 intelligent lighting controller is a stand-alone version of the controller used in Skene Design's P³ Lights. It adds our unique conspicuity flicker to your own add-on rear visibility lights and/or your existing tail/brake lights.

The IQ-160-TS model is a dual channel controller that can also power extra or existing turn signals, turning them into combined marker, turn signal and brake lights. If the existing or add-on turn signals are LEDs, it also provides them with our conspicuity flicker.

The IQ-160 can control any number of lamps of up to a total of 30 watts power dissipation. The IQ-160-TS model can support two channels (left and right), of up to 30 watts per channel.

Installation is quick and easy, and the controller can be used with any motorcycle. Programming the various functions is done simply by using the brake switch, in exactly the same manner as P3 Lights.

A comprehensive installation guide and all necessary connectors are included.

Skene Design provides a two-year warranty in the event of any defect in the product.

Programming

The IQ-160 can quickly and easily be programmed to any of several modes simply by using the brake lever. There is no need to cut wires or fiddle with tiny switches.

When the ignition is switched on, a programming window is enabled for 5 seconds. Activate the brake a given number of times within this time period, and your P³ Lights are reprogrammed! The end of the programming window is indicated by a brief flash of the lights. Do not activate the brake again until you see this flash. The brake flash sequence and tail light modulation modes are programmed independently, and remain in the selected mode when the ignition is switched off.

Programming Details

To program the IQ-160 controller, turn on the ignition. Within 5 seconds, activate the brake the following number of times, then wait for the brief flash to signal the end of the programming window:

BRAKE LIGHT PROGRAMMING

4 - steady brake light
5 - brake switches between low and high brightness 4 times *
6 - brake switches rapidly between low and high brightness 4 times,
then more slowly 4 times, then goes steady (default setting)

EMERGENCY FLASHER

7 - medium repeating flash
8 - rapid repeating flash
9 - quad flash

Notes:

Emergency flasher is disabled upon application of brake
Emergency mode is saved on power off. This allows you to switch your motorcycle to parking light mode and remove the key, without disabling the emergency flasher.

TAIL LIGHT MODES

10 - toggles tail light modulation (flicker) ON/OFF* (default is ON)
12 - toggles high brightness tail light ON/OFF (default is OFF)

* Depending upon local regulations, the user may want to disable tail light and brake light modulation.

Additional Information

IMPORTANT	N/A
Features	N/A
Kit Contents	N/A
Specifications	N/A
Technical Features	N/A
Fits	N/A
About	N/A
Support Docs	N/A