IQ-150 Intelligent Lighting Controller

The IQ-150 intelligent lighting controller is a stand-alone version of the controller used in Skene Design's Photon Blaster. It adds the unique conspicuity flicker to your own add-on front visibility lights.

The IQ-150-TS model is a dual channel controller that can also power extra or existing turn signals, turning them into bright marker lights. If the existing or add-on turn signals are LEDs, it also provides them with the conspicuity flicker.

The IQ-150 can control any number of LED or incandescent lamps of up to a total of 30 watts power dissipation. The IQ-150-TS model can support two channels (left and right), of up to 30 watts per channel.

Installation is quick and easy, and the controller can be used with any motorcycle. A comprehensive installation guide and all necessary connectors are included.

Skene Design provides a two- year warranty in the event of any defect in the product.

Installation

The Red wire from the control module is then connected to a switched, +12 volt source of power, typically a parking light. The Black wire is connected to any ground connection. High quality PosiTap^® insulation displacement connectors are provided for this purpose.

There is no need for a power switch, as the IQ-150 turns on with the ignition.

For the IQ-150-TS model with turn signal capability, you connect the green and yellow wires from the controller to the wires going to your vehicle's left and right turn signals, respectively.Your connected lamps then flash in concert with your turn signals, including your 4-way flashers.

The IQ-150+ model, which includes a unique visual voltmeter; it instantly checks the voltage of your vehicle's battery when you turn on the ignition. The system first measures the battery voltage, and then displays this voltage via a sequence of flashes on the LED modules with a precision of 0.1 volts.

The wiring for the IQ-150 is similar to the Photon Blaster system. Substitute your lamps for the Photon Booster modules, pictured, below: